Перейти к основному содержанию

The Philips model GC8220/02 is a pressurized steam generator that uses a 1.4-liter detachable water tank for ironing and steaming fabrics.

17вопросов Показать все

Why my steam iron can't get steam come out

The steam iron, I get the problem is steam don't came out...when I press the pressure button on the handle ,steam don't came out n the water still get boilling no steam out. How can I fix it?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 4
Добавить комментарий

3 Ответов

Выбранное решение

Hello,

I would try using a 50/50 mixture of distilled water and vinegar. I use this mixture to clean my coffee pot and steam mop. 90% of the time it works everytime!

Был ли этот ответ полезен?

Оценка 3
Добавить комментарий

Hello!

I just find some good web page. This problem is related to electronic, pump power supply.

https://lieven.kks36.be/2016/06/11/phili...

I hope it will help You.

Best regards!

Marin

Был ли этот ответ полезен?

Оценка 0

2 Комментариев:

How can I solve my steam generator problems, it do trip off if you pressed pressure bottom on the handle and steam doesn't come even after I cleaned it with 50/50 with white vinegar. Bello

из

Brilliant thank you. It's working now. 😁👏

из

Добавить комментарий

Try opening cap where the water is topped up. If it starts to steam then, on my Philips Azur, there are two tiny pinholes in the cap which were blocked. A poke with a pin was enough to sort the problem. They allow air to enter as it steams, otherwise a vacum would occur and stop the water flowing.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

phongtu008 будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 9

За последние 7 дней: 88

За последние 30 дней: 456

За всё время: 68,106