Перейти к основному содержанию

Четвертое поколение iPhone. Ремонт прост, но дисплей должен быть заменен в сборе с сенсорным стеклом. Версия GSM; 8, 16 или 32 ГБ памяти; модель A1332; в Черном или Белом цвете.

2375вопросов Показать все

Why wont the LCD cable stay in?

Hi, I am replacing the screen and home button on my iPhone 4. The LCD cable is long enough to go in its socket, and looks like it should fit, but it does not pop in, and keeps sticking straight upwards. Any thoughts ?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка -1
Добавить комментарий

2 Ответов

Выбранное решение

Remove the rubber bumper from the top of logic board, it may not be installed correctly. Fold the flex cable properly, many have the dotted lines where it should be folded.

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

It turned out that the cables weren't folded properly. In the end I also had to use more force that I thought to get the cable to go in, but now all is well and iPhone is fixed.

из

Добавить комментарий

Also make sure that both cables are pulled through all the way and aren't pinched between the lcd and chassis.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Michael будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 42