iMac 27 mid 2012 Fan blowing at full speed

Question

iMac Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

330вопросов Показать все

andreaslindell @andreaslindell

Репутация: 1

Опубликовано: 8 июн 2015 г.

Опции

iMac 27 mid 2012 Fan blowing at full speed

Ok, the stand of my Imac broke, so I opened up the Imac myself and replaced it with a new stand. After closing the Imac together, the fan blows at full speed. I have not changed any parts.

I tried to find a solution to the problem. Have done SMC reset and PRAM reset a zillion times, this does not solve the issue.

I have opened up the computer again and tried to see if there was any cables to the fan that wasn't set right, also checked cables to the hard drive.

Any solution or idea? Tried to find something about this, but most solutions seems to cover earlier Imac versions.

Best Regards

Andreas

Hi Dan,

Thanks for your response!

Here comes the screenshot!

Best Regards

Andreas

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

2 Ответов

score 2 · Answer 1 · 2015-06-17T14:49:36-07:00

Наиболее полезный ответ

Dan @danj

Репутация: 479,1к

Self employed contract worker

35

329

971

Опубликовано: 17 июн 2015 г.

Опции

Lets see if we can identify what sensor is giving you trouble by running this app: Temperature Gauge Pro. Post a screen shot for us to see.

Был ли этот ответ полезен?

Да Нет

Оценка 2

9 Комментариев:

Added screenshot above! thanks!

18 июн 2015 г. из andreaslindell

Did you replace your HD? It appears the drives sensor is not working. This model of iMac requires a special cable adapter when using either a HD or SSD which is not an Apple drive or one that supports the way Apple accesses the drives internal thermal sensor.

18 июн 2015 г. из Dan

No haven't changed anything inside but the broken henge/stand. I did actually open it again to see if the cables were loose or not set right, but everything seems to be correct, is it a cable that easily break?

19 июн 2015 г. из andreaslindell

Hi Dan,

Here comes a screenshot, it says though that "These sensors appear to be not working properly: Unknown"

Any idea?

Link to screenshot:

http://screenshot.net/3rnpwfw

Thanks!

Andreas

18 июн 2015 г. из andreaslindell

What drive do you have in your system? A HD or a SSD, or a Fusion Drive.

19 июн 2015 г. из Dan

Показать 4 больше комментариев