Is my backlight going out?

Question

iMac Intel 20" EMC 2133 and 2210

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548вопросов Показать все

Calion @calion42

Репутация: 3,1к

Syler Solutions

14

9

10

Опубликовано: 20 июл 2015 г.

Опции

Is my backlight going out?

The top of my screen is noticeably dimmer now than in the past. "Easy," I thought, "it's the top backlight going out!" But now I'm not so sure. See, whenever the iMac wakes from sleep, the screen is nice and bright for about ¼ second before going back to its now-normal dim state.

Can anyone tell me what's going on? Is my backlight in fact going out, or is something else going wrong? I've checked the brightness control in Displays, and calibrated the screen, with no improvement.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

1 Комментарий

Bump. Anybody? Bueller?

30 мар 2016 г. из Calion

Добавить комментарий

2 Ответов

Выбранное решение

Dan @danj

Репутация: 479,3к

Self employed contract worker

35

329

971

Опубликовано: 30 мар 2016 г.

Опции

Sorry I missed this the first time :-(

Sadly your system uses CCFL's which over time do fade in brightness as they get close to burning out. Just like your office ceiling CFL's do.

While you can still get replacement CCFL's they are a bear to replace and if you're not careful easy to break as well. Here's a good guide to follow: Removing CCFL from iMac 20in LCD CCFL assembly. If you've never attempted anything this complex you might want to opt out and just replace the complete LCD unit. While more expensive it is a lot less work and risk. Here's the IFIXIT guide: iMac Intel 20" EMC 2133 and 2210 Display Panel Replacement.

iMac Intel 20" EMC 2133 and 2210 Display Panel Изображение

Инструкция

iMac Intel 20" EMC 2133 and 2210 Display Panel Replacement

Сложность:

Модерировать

—

5 - 20 minutes

iMac Intel 20" EMC 2133 and 2210 CCFL assembly Изображение

Инструкция

Removing CCFL from iMac 20in LCD CCFL assembly

Сложность:

Сложно

—

1 hour

Был ли этот ответ полезен?

Да Нет

Оценка 2

6 Комментариев:

But does that explain why the screen will go back to its old brightness for a second after it wakes up?

4 апр 2016 г. из Calion

Yes, just like a ceiling CFL's they react the same way.

4 апр 2016 г. из Dan

CFLs slowly brighten as they warm up, not immediately dim right after they're turned on.

4 апр 2016 г. из Calion

You're over thinking this ;-} When the bulbs are just about worn out they get brighter.

5 апр 2016 г. из Dan

And then immediately dim? I've never seen that.

5 апр 2016 г. из Calion

Показать 1 больше комментариев

Добавить комментарий

But does that explain why the screen will go back to its old brightness for a second after it wakes up? — Calion
CFLs slowly brighten as they warm up, not immediately dim right after they're turned on. — Calion
You're over thinking this ;-} When the bulbs are just about worn out they get brighter. — Dan

Christopher Fernandes @christopher Репутация: 967 10 7 3 · Answer 1 · 2016-03-30T10:10:30-07:00

Christopher Fernandes @christopher

Репутация: 967

10

7

3

Опубликовано: 30 мар 2016 г.

Опции

The backlight might be fine. You may need to replace the inverter. I would suggest trying a new inverter before sourcing and replacing the LCD itself. Here is a guide on how to swap it out: iMac Intel 20" EMC 2133 and 2210 Inverter Replacement

iFixit does not have any in stock at the moment, but you might be able to find one on PowerBookMedic.com, Ebay, or Amazon.

Был ли этот ответ полезен?

Да Нет

Оценка 0

1 Комментарий:

If it was an inverter issue both CCFL's would react in the same way.

30 мар 2016 г. из Dan

Добавить комментарий

iMac Intel 20" EMC 2133 and 2210

Is my backlight going out?

2 Ответов

iMac Intel 20" EMC 2133 and 2210 Display Panel Replacement

Removing CCFL from iMac 20in LCD CCFL assembly

Добавьте свой ответ