Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

194вопросов Показать все

Some part of screen are unresponsive after digitizer replacement

Broke my front glass so I had it replaced with new digitizer.

Now after the replacement few parts of the touch screen are not responsive while others are fine.

What could this be? Even when the old glass was cracked, everything was still working smoothly.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

2 Ответов

It is most likely a defective part. Double check the connectors and make sure everything is tight. If any areas of the cable aren't making contact fully this can happen. If the connections are good then the part needs to be warrantied.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

There are really only a couple things this could be: A bad digitizer or the connections not being made. Clean off the digitizer connection cable and clean the connectors with 99% or 91% IPA. Make sure to check the connectors really well for damage. There is something about the iPad 3's connectors that like to break.

As always: use plastic tools and take your time. If you don't see any damage and the screen is still flaky, you know its a bad screen.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Ipadx3 будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 2

За всё время: 129