Remove the original home button when replacing iPad mini screen

Question

iPad Mini 3 Wi-Fi

Guides for the Wi-Fi version of the iPad Mini 3 (A1599). Announced on October 16, 2014, the iPad Mini 3 is the successor to the iPad Mini Retina (now known as the iPad mini 2).

61вопросов Показать все

Вопрос закрыт

AndreFix @andrefix

Репутация: 13

4

1

Опубликовано: 15 сен 2015 г.

Опции

Remove the original home button when replacing iPad mini screen

I'm replacing the digitiser screen on an iPad Mini. I want to retain the original home button so that the fingerprint recognition still works. I can't find a guide to removing the original home button from the digitiser panel. It seems to be glued in place with something harder/stronger than the usual double-sided tape. Is there a guide for this? It is not included in the screen replacement instructions.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

4 Ответов

Выбранное решение

AndreFix @andrefix

Репутация: 13

4

1

Опубликовано: 17 сен 2015 г.

Опции

Thanks for the answers Ross and Jimfixer.

I used the iFixit heat pack from the front face of the screen, just over the button area and it softened the glue enough to be able to slide a sharp knife into the glue.

Now I just need to put it all together with the new screen.

Cheers,

Andre'

Был ли этот ответ полезен?

Да Нет

Оценка 1

Добавить комментарий

Jimfixer @jimfixer Репутация: 102,5к 18 191 304 · Answer 1 · 2015-09-15T19:47:23-07:00

Наиболее полезный ответ

Jimfixer @jimfixer

Репутация: 102,5к

18

191

304

Опубликовано: 15 сен 2015 г.

Опции

There is a guide here on ifixit

iPad Mini 3 Wi-Fi Teardown

and it does appear that it is glued down. A hot air gun should help release it but take care not to get it too hot as it can melt solder as well. A hair dryer may work as well

Был ли этот ответ полезен?

Да Нет

Оценка 2

Добавить комментарий