Перейти к основному содержанию

Руководства по полной разборке и установки практически для всех ноутбуков и компьютеров Mac .

42677вопросов Показать все

Why is my screen all white?

Hi there,

I spilled some Rhum on the key board of my Macbook on the power cord side 3 days ago. I removed the battery and let it dry upside down. The computer worked without any trouble when I swithed it on yesterday, I used it only 5 minutes. when I tried again this morning the screen was plain white. What can be done to fix this? Also would I need to open the Mac and clean the inside? What kind of product can I use?

Thank you heaps for your help!!

Christelle

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Выбранное решение

For future reference Christelle, if something spills on it (or another device) you should do the following:

Find out what kind of Mac you have - you can use our ID-Your-Mac tool. Once you know that, open it up using the corresponding guide on one of the device pages for the Mac.

Once you're at a step where you can see the logic board / parts where liquid got into, you should use some strong isopropyl alcohol and a soft brush to remove any white-ish residue (corrosion) that you see. Let the device dry <thoroughly> to make sure all liquid is gone (this will likely take a day or two in a warm, dry place if the device is opened up. (Normally, putting a smaller device in a bag of rice can also be useful at this point.) When it is dry, put it back together, and you will have your best chance of it working.

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Добавьте свой ответ

Christelle будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 2

За всё время: 574