Перейти к основному содержанию

A collection of guides and support to help with washer repair.

3445вопросов Показать все

Machine not working , Error dE

Although the lid is closed and the magnet attached to the lid is intact, the door open error message (dE) is displayed and the machine (LG fuzzy logic model no. T6515TDPT01) stops working after taking two /three turns in wash mode. I seek help from you guys to fix the problem. Thanks

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 3
1 Комментарий

Check to make sure that the connector coming from the switch is properly seated on the circuit board.

из

Добавить комментарий

2 Ответов

Наиболее полезный ответ

Might be the magnet, usually the magnet pushes this switch the shows the door is closed. Hard to explain. Do you happen to have pictures?

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

I shall fix a stronger magnet and shall see if it works.

из

Добавить комментарий

Power off the machine and unplug it if you receive the error mid-cycle or at the end of the cycle. After five minutes, restart the machine and try to open the door again.

Wait about a minute for the door to unlock if you paused the machine during a cycle. In this situation, the locked door and appearance of the DE error is merely a safety precaution.

Был ли этот ответ полезен?

Оценка 1

3 Комментариев:

Simple and great solution!

из

I could not get you dear gillrois. plz explain elaborately.

из

Click on the link for troubleshooting LG washer with error code DE. Hope this help Immi.

http://www.ehow.com/how_7850983_troubles...

из

Добавить комментарий

Добавьте свой ответ

Immi будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 3

За всё время: 239