Репутация: 33
3
2
the phone is droped badly when i assembled whole logic board in other housing with new lcd and flex cables everithing is working except the front facing camera on image is the missing part but everithing else is on place i think. please tell me what to do... thanks
Это хороший вопрос?
Репутация: 33
3
2
i fix the board ,and now the camera is working.... there are a missing component above the screw ring, the third component from right in the first row just above the ring that i miss.
thank you all for yours time, thanks alot :D
Был ли этот ответ полезен?
Репутация: 57,5к
18
77
212
Wait I'm confused. Why can't you just put a new front camera assembly on there?
Был ли этот ответ полезен?
i also do a microsoldering and tht stuff but i can find a problem, i put a few new cables but nothing ....
do you have any idea what should i do?
i think its a hardware error
I'm not sure which part your missing
Репутация: 30,6к
25
71
41
That board looks fine in that section. Rule out bad part. Rule out software--front and rear cams are dependent on each other. After that, head to schematics--search for Cam 0 and cam 1 --follow lines, measure voltages in and voltages out. Look for missing damaged components, that's all you can do
Был ли этот ответ полезен?
Репутация: 1
4
Hi .
I had similar problem with my iPhone 3 since last year .
It resolved after I updated my iPhone 4 via iTunes .
It might work orbit could be a hardware issue .
Regards ,
Kksilvery .
Был ли этот ответ полезен?
За последние 24часов: 0
За последние 7 дней: 1
За последние 30 дней: 1
За всё время: 2,958
2 Комментариев
I never had this instance before but I think you should get your phone fixed first and then go to the store where you got your phone from. Ask them how to fix it.
из Avneet
When you reassembled the phone to test it you didn't get anything over the camera by accident did you I have had occasion to get tape or glue on the lens not realizing it was covered It doesn't take much
из Jimfixer