Перейти к основному содержанию

HP ProBook 4320t manufactured in May of 2010.

6вопросов Показать все

Can't remove CPU heatsink because two of the screw heads are damaged

I replaced the thermal paste on the CPU and Radeon chip in a 4320s a couple years ago due to over heating causing shutdown on boot which fixed the issue.

It's happening again but this time I can't remove the heat sink because two of the screws holding it in place are damaged and won't turn no matter what screwdriver I try. The driver just spins in the head of the screw.

Any advice would be greatly appreciated.

Thanks in advance!

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка -1
Добавить комментарий

1 ответ

Have you tried these:http://www.amazon.com/Alden-8440P-Grabit...

Or use a round disc bit to carefully grind a line in the screw with a dremel so the screwdriver will grip?

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Zayn будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 538