removing keyboard plate cover

I wasn't paying attention when I was removing the keyboard plate cover when I replaced my hard drive on my asus F555LA and then I realized not all of the 10 screws were the same length. I know, I know, I usually lay them out in a pattern, but I didn't this time. Anyhow, there are 4 long, 2 short, and 4 medium. Help me please find a diagram like this one, Step 1, for my model.

https://ifixit-guide-pdfs.s3.amazonaws.c...

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0

1 Комментарий:

Hi,

If you can't find a guide, can you use a piece of wire to judge how deep the screwhole is and see if there are 3 different depths that you can line up with the 3 screw lengths?

из

Добавить комментарий