Перейти к основному содержанию

The Ryobi P202 part of the Ryobi One+ series. This model is an 18-volt cordless 1/2 inch drill, and is bright green and grey in color. It has a built in level gauge and a two gear ratio switch on the top of the drill, along with a direction switch, magnetic tray, and drill bit clip.

Вопросов 7 Показать все

Drill will run for only a few seconds

When you pull the trigger the drill only runs a short time and stops. Releasing the trigger and re-pulling it does nothing. If you release the trigger and switch direction, then pull the trigger it run but again only for a few seconds.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 3
1 Комментарий

Hi I have the same problem.I'm thinking bushes.I'll look later and let u know bro

из

Добавить комментарий

Ответов (1)

Выбранное решение

Battery is most likely dead. Try charging it,........ . Test it using a multimeter. The batteries can go bad and they will no longer accept a charge.

Был ли этот ответ полезен?

Оценка 1

3 Комментариев:

The battery can be easily tested using a multimeter ,check voltage before charging, then fully charge the battery , then check to see if it has correct voltage after charging,

из

This is not very helpful ,the batteries are fully charged and the batteries work fine in other Ryobi tools.

из

Mark Day, yeah i absolutely right with you ,

My problem is with a cordless drill 18V ..

Its worked for a few seconds atleast 3 or 5 second then become off but the battery are fully fine

из

Добавить комментарий

Добавьте свой ответ

Paul Moad будет очень признателен(а).
Статистика просмотров:

За последние 24 час(ов): 2

За последние 7 дней: 22

За последние 30 дней: 71

За всё время: 10,180