Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Компания Apple представила iPhone 5s 10 сентября 2013 года. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 32 или 64 ГБ памяти; в цветах: Серебристый, Золотой и «Серый космос».

3995вопросов Показать все

iPhone 5s Error 9: Can't restore through DFU or Recovery

Hey guys, I recently got a used iPhone 5s from eBay, and the seller says that it's working, it's just that it's not restoring because of her computer firewall (Error 3014).

I've got it today and tried to restore it through Recovery and DFU mode, but quickly ran into Error 9, a flashing blue screen and then back to recovery mode.

I've opened up the 5s and checked for the long screw damage, but the bracket and the screws were not there anymore, same goes for the battery bracket. A close inspection says that the bottom right screw hole was not damaged (it's completely black down and doesn't seem to be damaged).

Other things that I've tried but to no avail:

- Restoring while screen, TouchID, digitizer and front camera flex are disconnected (DFU and Recovery)

- Forcing iPhone to get out of recovery (but instead got a red screen + boot loop)

At this point I am very sure that there's a problem with the hardware itself, but have anyone ever had this problem before? And what should I look out to resolve this?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

LCD iPhone Screen Fix Kits

The budget option, covered by our Lifetime Warranty.

Shop Kits

LCD iPhone Screen Fix Kits

Cut repair costs, not quality.

Shop Kits

2 Ответов

Try to use another cable, probably not genuine cable. Try to use genuine one.

Был ли этот ответ полезен?

Оценка 0

Комментарии:

I tried genuine cables that came with my iPhone 6, iPad Air 2 and my old iPhone 5s. It's certainly not a cable problem.

из

Добавить комментарий

Hi bro

common Error 9 problem is NandFlash

maybe try take off the Nandflash and than reball the Nand

than put back

but when you take off the Nand very carefully

and whan you put back the Nand very carefully

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Liang Chun будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 245