Перейти к основному содержанию

Компания Apple представила iPhone 5s 10 сентября 2013 года. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 32 или 64 ГБ памяти; в цветах: Серебристый, Золотой и «Серый космос».

3530вопросов Показать все

The brand new screen I installed has backlight banding issues

Hello,

I purchased and installed a new Full Assembly fix kit for my wife's iPhone 5s. It powered up well and install was a cinch but there are dark bands along the top of the screen that I'm assuming are related to the backlight. Any ideas? Do I have a connection that wasn't made well or is it possible the assembly kit was a lemon?

I have a picture of the banding that I will try to upload (not so sure I can make it work).

Thanks!

Adam

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
2 Комментариев

For future reference, it's impossible for the backlight to cause black banding.

из

Good to know, thanks. Figured it was the backlight because I had an LCD tv with the exact same banding issue and according to Sharp it was a problem with the backlight.

из

Добавить комментарий

2 Ответов

Выбранное решение

The LCD cable is the easiest (and smallest) of the three ribbons to snap / click in place. I'd give it several attempts to get the cable connected and if its still showing banding you've either got a damaged connector or a bad screen. If it's an aftermarket screen I'd probably be tempted to go with the latter, but check your board... with a magnifying glass if needs to be. Good luck.

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

Thanks Mike. Giving this and the similar advice I got a shot tomorrow when my wife won't need her phone (in case something goes wrong).

Adam

из

Добавить комментарий
Наиболее полезный ответ

Hi

It could be a bad connection from either

only way to check this is to have another screen handy.

I always find if I get banding on LCD, its usually the connection teeth on the clip

get your best magnify glass out... check all the legs are strait and clean.

happy days

Ray

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

Thanks Ray. Getting into it tomorrow with your advice and that of the other poster. I figured it had something to do with a connection unless the screen was just a lemon. Will let you know.

Adam

из

Добавить комментарий

Добавьте свой ответ

adamfryer будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 198