Why is my lcd showing a dim light after replacement

Question

iPad 4

Repair information for the 4th generation iPad. Released November 2, 2012. Model numbers: A1458, A1459, and A1460.

408вопросов Показать все

lateef ambali @lateeef02

Репутация: 13

2

Опубликовано: 28 июн 2016 г.

Опции

Why is my lcd showing a dim light after replacement

So I replaced my lcd on my iPad 4 everything seem to went well the first time but I noticed parts of the screen wasn't working so I took it apart again but this time when I reassembled it the lcd turned on but it was a dim black light and it wasn't showing no picture I'm not sure what to do please help

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

3 Комментариев:

Did you turn off the iPad when unplugging the LCD and replugging it?

I'm not 100% sure if unplugging the battery is required as well.

29 июн 2016 г. из Ben

No I didn't completely turn it off but I did a hard reset and that still did not solve the problem

29 июн 2016 г. из lateef ambali

So right now it is showing no display but a dim backlight around the screen or something along the lines of that? Could be backlight fuse(s) blown or if unlucky LCD ribbon cable gone bad.

29 июн 2016 г. из Ben

Добавить комментарий

1 ответ

Did you turn off the iPad when unplugging the LCD and replugging it?

I'm not 100% sure if unplugging the battery is required as well. — Ben
No I didn't completely turn it off but I did a hard reset and that still did not solve the problem — lateef ambali
So right now it is showing no display but a dim backlight around the screen or something along the lines of that? Could be backlight fuse(s) blown or if unlucky LCD ribbon cable gone bad. — Ben