Перейти к основному содержанию

Дата выхода 25 сентября 2015 г. Модель A1688 / A1633. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 64 или 128 ГБ памяти; в цветах: Серебристый, Золотой, «Серый космос» и «Розовое золото».

2683вопросов Показать все

Soap water in my iPhone6s's home button

So yesterday i got water with a little bit of soap in it on my phone. First the ear speaker had very low volume so i sucked out the water and it worked. But then my home button started acting strange. It started opening Siri and acting like its pressed. And I could hear some water in it so i turned it off. Today the button is working but there is still water so i went to a repair service and they said that they will check it out. Do you think there is hope and how much could it cost?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
2 Комментариев

Cost depends on the place you've sent it in to get it repaired. I wouldn't really know as it varies across country. Shouldn't cost too much if parts don't need to be replaced if you are lucky.

из

Thanks for the answer. Today i got it back and they said that the just had to dry it out and now everything is ok. Knock on wood!

из

Добавить комментарий

1 ответ

Выбранное решение

All costs depend on the shop. Water damage repair is always a 50/50 chance of bringing the phone back. I would look into possibly getting another phone in the near future, as even if it is repaired, there is no guarantee as to how long it will last due to the corrosion.

Был ли этот ответ полезен?

Оценка 5

3 Комментариев:

The service said that they only needed to dry it out. When i gave it to them there weren't even 24 hours since i've got water in the home button. So they said that the device is fine. I hope that everything is okay with it and i can countinue using it for a long time.

из

The best thing for water damage is cleaning the ports with a 91% alcohol solution to get any start of corrosion away, THEN popping it into the ovens no more than 155 degrees to dry out everything. Just simply drying it is fine, but that extra step really does help.

I will keep my fingers crossed for you that it continues to work and all is well. I'm really glad they were able to take care of things for you!

из

Добавить комментарий

Добавьте свой ответ

Nia Baldaranova будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 136