Why the device doesn't turn on with the new display assembly?

Question

iPhone 5

Шестое поколение iPhone компании Apple, представленное 12 сентября 2012 года. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 32 или 64 ГБ памяти; в Черном или Белом цвете.

2522вопросов Показать все

Rocco Lorusso @rok

Репутация: 33

2

Опубликовано: 4 авг 2016 г.

Опции

Why the device doesn't turn on with the new display assembly?

After the display assembly replacement, the device doesn't turn on, but only shows (full screen) the battery (as if it would be out of charge) and the lightning plug icons.

Once I plug it in, only the battery icons remain, and if I disconnect the battery (while the plug is in) it shows the apple logo for a few seconds and then gets shuted down.

Is there something I could try before contact the vendor asking for the replacement?

Thank you all ^^

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 1

Добавить комментарий

2 Ответов

Выбранное решение

Klaus Lehmbecker @klausibert

Репутация: 79

5

1

Опубликовано: 4 авг 2016 г.

Опции

Try disconnecting the battery and reconnecting it again after a few seconds. I had a similar problem and this worked for me.

Был ли этот ответ полезен?

Да Нет

Оценка 1

3 Комментариев:

Thank you Klaus :) it tooks me a bit more than a few seconds, but it finally works!

I also had to keep it under charge for a few minutes (as suggested by the support).

Btw, thank you again!

6 авг 2016 г. из Rocco Lorusso

Yeah, usually this means battery is flat or bad contact with both the battery connector and the battery ribbon cable plug itself, replugging it solves this issue most of the time.

6 авг 2016 г. из Ben

You're very welcome, glad it worked:)

9 авг 2016 г. из Klaus Lehmbecker

Добавить комментарий

Thank you Klaus :) it tooks me a bit more than a few seconds, but it finally works!

I also had to keep it under charge for a few minutes (as suggested by the support).

Btw, thank you again! — Rocco Lorusso
Yeah, usually this means battery is flat or bad contact with both the battery connector and the battery ribbon cable plug itself, replugging it solves this issue most of the time. — Ben