Перейти к основному содержанию

Display power inverter pinout or voltage for each of 6 pins needed?

I have a broken LCD on my netbook. The LVDS cable correctly fits in the display for my iMac which was gutted when the logic board caps went bad.

I have tossed the logic board. I still have the display, the power supply and the inverter. I need to know the voltage that each pin on the inverter takes to power the back light on the iMac display directly from the power supply.

The following links may be helpful to someone who speaks French.

http://forum.macbidouille.com/index.php?...

[ http://users.skynet.be/fa835376/pas%20a%...]

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 3
Добавить комментарий

1 Ответ

Выбранное решение

This is from an iMac G4 is this something that you are looking at?

The inverter has 8 pins in as described below.

Blue = 11.93v

Red = 11.93v

Blk = GND

Blu = GND

N/C

Yel = .2mv

Prpl = 3.262v

Orng= no voltage detected

Был ли этот ответ полезен?

по рейтингу 3

Комментарии:

Check this out and see if it will help you.http://dremmeljunkie.blogspot.com/2010_0...

Good luck

от

Also if you have the part number here you can look up the specs

http://www.jkllamps.com/index.cfm?action...

от

Добавить комментарий

Добавьте свой ответ

Shane Nelson будет вечно благодарен.
Просмотр статистики:

За 24 часа: 2

За 7 дней: 5

За 30 дней: 21

За всё время: 6,100