Can't get top right corner screw back in.

Question

iPhone 4 CDMA

CDMA версия четвертого поколения iPhone. Ремонт прост, но дисплей должен быть заменен в сборе с сенсорным стеклом. 16 или 32 ГБ памяти / Модель A1349 / Cовместимость с CDMA.

295вопросов Показать все

A S Koski @skoski

Репутация: 35

2

Опубликовано: 3 окт 2016 г.

Опции

Can't get top right corner screw back in.

I took apart my iphone 4 and, as expected, had trouble removing the top right screw (near the audio jack). Now that I am trying to reassemble, I CAN NOT get the screw back in. I have been working on it for an hour.

I am using the tool kit from ifixit and the screw driver hand is too thick to be able to get a direct line on the screw. I need some advice on how to proceed.

1. Is their a screw driver with a longer thinner shaft that might work?

2. What happens if I leave the screw out altogether? (I did try that but the reassembled phone is unresponsive.

Any other ideas?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 1

Добавить комментарий

1 ответ

Vincent Monteil @vmonteil Репутация: 6,9к 31 16 20 · Answer 1 · 2016-10-03T10:51:29-07:00

Наиболее полезный ответ

Vincent Monteil @vmonteil

Репутация: 6,9к

31

16

20

Опубликовано: 3 окт 2016 г.

Опции

Hi !

As long as this screw is a contact screw, there's no surprise about your phone not responding once reassembled.

I suggest that you use different screwdrivers, not being able to give you an accurate reference as long as I no longer own an iPhone 4. If you still can't manage to screw it or that the head is a bit damaged, some tools sold f.e. at iFixit may help you. I personally use this one for damaged screws.