Перейти к основному содержанию

Игровая приставка от Sony Computer Entertainment, анонсированная 20 февраля 2013 года и выпущенная 15 ноября 2013.

1691вопросов Показать все

Why Wont Solder Stick To The Pads To Replace Hdmi?

I Have replaced multiple HDMI ports on the Playstation 4 But the system Im working on Now had some really old bad solder on the board after i removed the old HDMI so I cleaned it But now new solder wont stick to the pads...Any Help is appreciated

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0

1 Комментарий:

Do you have any pics?

из

Добавить комментарий

3 Ответов

Get a solder sucker and remove all the old soldering.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Try using an electronics grade rosin based flux,

It's usually sold in a pen or syringe, any other flux is corrosive and will damage the board over time.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

I would make sure that the board is totally clean by removing any excess flux or solder that still may be attached. You can do this with a board cleaning pen or you can also find it in a spray. I would also recommend using a rosin flux, like this rosin flux pen from Chemtronics.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Jayvon Saunders будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 4

За всё время: 842