water damage, no sound, very slow, fan keep spinning in high speed

Question

MacBook Air 13" Mid 2012

1.8GHz dual-core Intel Core i5 (Turbo Boost up to 2.8GHz) with 3MB shared L3 cache

371вопросов Показать все

Jun Hu @junhu

Репутация: 1

Опубликовано: 10 окт 2016 г.

Опции

water damage, no sound, very slow, fan keep spinning in high speed

MacBook Air 13" Mid 2012

Spilled some water on it, then some keys stopped working, so I replaced the keyboard, the new keyboard works fine, however after the replacement; there is no sound at all (not even the boot up chime) , and it becomes very slow , even just moving the mouse lags; and the fan is always spinning at high speed;

The WIFI also malfunctioned after replacement for some time (no hardware installed), but somehow it is working again.

I tried to reset SMC, doesn't work, the LED on the magnet connector doesn't even light up.

which part might be wrong in such case? logic board or I/O board?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

Выбранное решение

rdklinc @rdklinc

Репутация: 32,4к

RDKL, Inc.

207

156

62

Опубликовано: 10 окт 2016 г.

Опции

Personally I would run both the board and the I/O board through my ultrasonic cleaner. There's probably still gunk/corrosion causing these issues.

If the board or I/O board have been damaged, an ultrasonic cleaning won't help, but the first step is to remove the gunk and verify that's not the problem.

Был ли этот ответ полезен?

Да Нет

Оценка 1

4 Комментариев:

John, very long time, no see ;-)

11 окт 2016 г. из mayer

Thanks for your answer, however I don't have a ultrasonic cleaner, and from the visual inspect, the boards do not seem to be dirty

11 окт 2016 г. из Jun Hu

Hi @mayer ! Good to see you and hope you're doing well!

11 окт 2016 г. из rdklinc

Concerning the board, have you inspected the other side? If the liquid came through the keyboard, corrosion could easily be on the other side. Even then, it's not necessarily visible -- part of the benefit of an ultrasonic cleaner is that they clean UNDER the chips.

11 окт 2016 г. из rdklinc

Добавить комментарий

Thanks for your answer, however I don't have a ultrasonic cleaner, and from the visual inspect, the boards do not seem to be dirty — Jun Hu
Concerning the board, have you inspected the other side? If the liquid came through the keyboard, corrosion could easily be on the other side. Even then, it's not necessarily visible -- part of the benefit of an ultrasonic cleaner is that they clean UNDER the chips. — rdklinc

MacBook Air 13" Mid 2012

water damage, no sound, very slow, fan keep spinning in high speed

1 ответ

Добавьте свой ответ