Перейти к основному содержанию

Model M6497 or A1005 / 500, 600, 700, 800, or 900 MHz G3 processor

117вопросов Показать все

Why can't I boot from any source?

Hi! I have an iBook G3 500 MHZ and I have recently replaced the DC-in board and put in a newer hard drive from one of my dead iBooks and a slot-loading combo drive. My computer now won't boot from anything. I have tried my internal hard drive, which has OSX 10.3 on it, firewire target disk mode from 2 iBook G4's, and Mac OSX 10.4 Tiger installation DVD boot. When the iBook starts up the screen flashes, becomes black, and lights up again with a blinking ? and Finder icon. I start up again while holding the option key and the blue screen with my hard drive, install DVD, etc. comes up. I wait for the watch to go away and click the install DVD, and then the right arrow. The screen then flashes blue and starts finding the disks again. It doesn't boot. What is wrong?

UPDATE: I just installed Tiger on the iBook using Firewire Target Disk Mode and confirmed that the drive is just fine.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка -1
1 Комментарий

I have confirmed that the hard drive works just fine because l booted off of another iBook. I just finished testing the combo drive by sticking it in an intel iMac and it works like a charm too. Does my book not like osx?

из

Добавить комментарий

1 ответ

Выбранное решение

You have changed to many things without confirming they worked before going on. You need to go back to the first change and make sure it works and proceed with one change at a time. There is no way for us to know which alteration has caused the problem.

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

good answer +

из

Добавить комментарий

Добавьте свой ответ

Jack Byrnes будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 3

За всё время: 899