Перейти к основному содержанию

Why dont my reverse lights work when I put it in reverse?

My reverse lights havent worked since i changed steering columns. So that i had tilt the other day i plugged in a trailer and they suddenly started working since i dont know where their activated from its hard to track down the problem

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 1
Добавить комментарий

PC Laptop Batteries

An easy fix for a big power boost.

Купить сейчас

PC Laptop Batteries

An easy fix for a big power boost.

Купить сейчас

1 Ответ

Выбранное решение

Trikkidick West, since the reverse lights went out after changing column probable bad wire/plug connection at the park,neutral,reverse bulb switch which is attached to lower part of steering column. Strange thing is you say they are working now after plugging in trailer plug so you should also follow that harness and check for shorted/damaged wires, also make sure all grounds are clean and tight. Link below shows a diagram of switch on column, switch is #3 on diagram. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

http://www.truckforum.org/threads/backup...

Был ли этот ответ полезен?

по рейтингу 4
Добавить комментарий

Добавьте свой ответ

Trikkidick West будет вечно благодарен.
Просмотр статистики:

За 24 часа: 2

За 7 дней: 14

За 30 дней: 48

За всё время: 402