Компания Apple представила iPhone 5s 10 сентября 2013 года. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 32 или 64 ГБ памяти; в цветах: Серебристый, Золотой и «Серый космос».

3725 Questions Показать все

Screw length and placement

Please help

I want to build an iPhone 5s from scratch but I need to know exactly where each screw goes with it's length

PLEASE PLEASE SOMEONE help

I have seen this guide before but can't find it again

If someone could link it that would be great thanks

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 0
Добавить комментарий
Spread Fixmas Cheer
Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
Spread Fixmas Cheer
Получите $12 за покупку от $50 и выше с промокодом FIXMAS12

3 Ответов

Выбранное решение

If you follow this guide iPhone 5s Logic Board Replacement then you will see where each screw goes and what dimension it is.

Был ли этот ответ полезен?

по рейтингу 3

Комментарии:

Thanks so much

Any advice for the rest of the phone?

от

There are various guides if you start your search here...

iPhone 5s Repair

от

Yeah but like I said I need one with all screw lengths if possible

от

As far as I know, there is no one guide that shows all the screw lengths. Maybe someone else here can chime in. Otherwise, go through the guides as you need them. If you are only swapping a logic board from one good housing to another, that should be pretty straight forward. If you are building up a blank housing from scratch, start with the button flexes and mark the screws before you move them. If you have a jumble of parts and screws, then go through the guides.

от

Its all good I just realised if I follow the housing replacement it has all the screws so thank you very much

от

Показать 1 больше комментариев

Добавить комментарий

Oh my god. I wanted to do this to. But I hate to break it to you: IT IS NOT WORTH IT.

save up money, and buy a new one.

The components are retail-priced, so if you bought all the components, it would cost you more than just buying one. And touch id won't work, until someone finds a way to re-pair it.

Был ли этот ответ полезен?

по рейтингу 2

Комментарии:

Yeah but I bought a 32 gb motherboard

And with all parts totals to only about £70-£80 so I'm going to continue trying

от

then you better assemble it right. You must also get a 3rd party rear chassis without the imei of your phone etched into it, and then etch it in yourself.

then you must put in all the adhesives apple uses (which can be very hard to come by), you must apply threadlocker to some (but not all) the screws, then you must put the thing together. THEN you must go to apple and have them service the touch id module, crossing your fingers you did a %#*@ good job putting this all together, so they wont spite you for a 3rd party repair. IT IS NOT WORTH IT!!! You'll waste too much of you're valuable time with this.

от

Добавить комментарий

Well here is an ifixit guide to disassembling the phone, so in reverse order you'll have a franken-5s

iPhone 5s Teardown

Был ли этот ответ полезен?

по рейтингу 0
Добавить комментарий

Добавьте свой ответ

Ryan Green будет вечно благодарен.
Просмотр статистики:

За 24 часа: 1

За 7 дней: 12

За 30 дней: 59

За всё время: 429