Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту


Дата выхода 19 сентября 2014 года. Это маленькая версия iPhone 6 Plus с 4.7-дюймовым экраном.

5117вопросов Показать все

Broken screw for front panel

While repairing a broken front panel of a iphone 6 I removed the 1.6 mm screws on the right side of the panel in step 35. One oft the screw heads broke. But I could get it out. Can I reassemble the phone without getting a new one or is it not recommended. If I would need the screw where could I get it.

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий


Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits


Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits

1 ответ

Выбранное решение

Do you mean this step?

iPhone 6 LCD and Digitizer Replacement

Those upright clips (between the screws) on the shield plate are what "lock in" when you secure the screen assembly in the housing. They are not critical for the phone to operate, they are there to structurally support the clips when you remove the screen assembly. Screw kits can be bought if you want to replace it. I always keep some on hand but for a fixer, I would probably just use a screw from the left side (the middle one) and use it on the right as it is longer distances between screws and it will need more support.

Был ли этот ответ полезен?

Оценка 2


Yeah that is what I did on the short side I just used two screws and now I put it together and it works great. Thanks for the answer.


Добавить комментарий

Добавьте свой ответ

Claes будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 2

За всё время: 53