Опции

The display started showing something like snowflakes

Hi guys,

I have followed the exact steps of reinstalling the HD in my iMac Intel 20" EMC 2266. However, as soon as I put all parts back in, connected all necessary cables and turned on the iMac, the LCD display started displaying something like snowflakes and lines all of the time. It looks like and old time TV when your antenna is not fixed and you see the picture through snowflakes. Does anyone know how to fix that?

Thank you very much in advance.

Best regards,

Petar

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 1

2 Комментариев

Hi,

Can you please tell me if this was resolved as I have had this identical problem after replacing the fan.

Kind regards

28 апр 2011 г. из Joe

no it has not been resolved

1 мая 2018 г. из Faithhopelove Ministry

Добавить комментарий

Опубликовано: 2 дек 2010 г.

Опции

The new hard drive would not do this. Please go back to the repair guide and check all the connections you touched. Check the connect on the display data cable.

Был ли этот ответ полезен?

Да Нет

Оценка 2

4 Комментариев:

Good to see you back +

2 дек 2010 г. из rj713

I have checked all cables thoroughly. The display data cable is also connected to the logic board as well as to the display. Still the same. Is it possible that the cable is somehow corrupted?

2 дек 2010 г. из Petar

Could be, visually check it for damage.

2 дек 2010 г. из mayer

I have checked and checked, everything seems to be ok with the cables. Still can not figure our why it displays such a picture

2 дек 2010 г. из Petar

Добавить комментарий

iMac Intel 20" EMC 2266

The display started showing something like snowflakes

1 ответ

Добавьте свой ответ