Перейти к основному содержанию

Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

84вопросов Показать все

After reassembling my PSP Go the Start & Select buttons won't work

After i disassembled and rereassembled my PSP Go to fix my power switch; i used the PSP Go Teardown guide from this website, and now both the Start & Select buttons won't work anymore; and they were working before then.

so i tried taking my psp go apart and putting it back together again while going over the teardown guide thinking i over looked something, anyone have an idea of what that might be?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 3

Комментарии:

This is how you replace it. https://imgur.com/gallery/JRRsJku

из

Добавить комментарий

3 Ответов

Выбранное решение

Look at the 2nd picture of step 9 in the PSP Go teardown. There is a cable that connects the buttons to the main board, it could be loose.

Был ли этот ответ полезен?

Оценка 3

Комментарии:

Here's a direct link to the page Aram is mentioning. PSP Go Teardown

из

thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable.

из

Добавить комментарий

I have the same issue, except my cable is in. Any ideas? I just had sound issue which was caused by bad fuse, which i replaced and now works but SELECT/START button doesn't

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

It comes out from the front. First detach from the motherboard and then take it out from the front. The Start/Select buttons are sticked on.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

joel c будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 10

За всё время: 5,792