Перейти к основному содержанию

Дата выхода 19 сентября 2014 года. Это большая версия iPhone 6 с 5.5-дюймовый экраном.

1525вопросов Показать все

touch id not working after just opening it, original button and lcd

Hello

My touch id of iPhone 6 plus isn't working anymore, had to replace the camera, but now just closing the lcd isn't working anymore (id touch) have not touched lcd or id touch button, the only wrong thing i did was not to take off battery before taking off lcd

what can i do? it says try later, no error on itunes (tried every thing)

Can I contact apple or just have to wait few days? (my friend who have a shop told me this)

This was not my first reparing

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

4 Ответов

Did you disconnect the battery? If not do a hard reset on the phone(hold down power and home button for about 10 seconds). You had to have unplugged the home button/touch id(through the interconnect cable) to replace the camera. Without a reboot phones dont recognize the touch id after unplugging and replugging it in.

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

just tried with hard reset, still not working

i don't know what's gone wrong... Have also unplugged battery but same problem, say try later, the id touch option is not disabled but when click say please try later ....

из

Добавить комментарий

just tried with hard reset, still not working

i don't know what's gone wrong... Have also unplugged battery but same problem, say try later, the id touch option is not disabled but when click say please try later ....

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

do you think if i change backplate with long flex, will start working again?

Был ли этот ответ полезен?

Оценка 0

3 Комментариев:

Thats pretty much the only other part that can be replaced and still keep the touch id at this point.

из

ok thanks, gonna try it

из

Hello, did you replaced long flex cable of home button? Did the Touch ID worked fine again?

thanks.

из

Добавить комментарий

look under the LCD is a metal plate under that metal plate is a flex cable that connects home button with motherboard, change the flex cabble and try again

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

madaraus будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 96