Перейти к основному содержанию

Обновленная версия iPhone 3G с более высокой скоростью обработки. Ремонт этого устройства схож с iPhone 3G, и требует простых отверток и инструментов для вскрытия. Модель A1303; 16 или 32 ГБ памяти; с Черной или Белой задней пластиковой крышкой.

1500вопросов Показать все

replaced broken screen and display is dim

I replaced my broken a screen and it works but it is extremely dim. I went to brightness, cranked it up, but it did not change it. Since i bought two 3GS screens, i installed the second one, but had the same results.

Anyone have an idea?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка -1
1 Комментарий

by screen do you mean just the front display glass or entire display including lcd

из

Добавить комментарий

5 Ответов

Выбранное решение

My suggestion here is that you do not have the backlight working. Easy for me to guess since I am not looking at your phone. Check out this site and see if it makes sense for your to fix your phone the way it is described. I mean you would have to be pretty unlucky to buy nothing but broken screens. Possible? yes but very unlikely. Just my 2 cents...here is the site http://blog.techsick.com/guides-tutorial...

Был ли этот ответ полезен?

Оценка 1

2 Комментариев:

i agree with your 2 cents

из

ah...it is blown. the people before me did try to install a 3G screen into the 3GS phone....no way for me to fix it at this point.

thanks for the help all

из

Добавить комментарий
Наиболее полезный ответ

Are the screens original Apple replacement ones, or cheap generic screens? I'm wondering if that may be the trouble. Do you have any screen, cracked or otherwise, that is original which you could temporarily connect and will give an indication of brightness level? You could then confirm that it isn't another hardware issue within the phone, but is actually the new screen.

Был ли этот ответ полезен?

Оценка 1

2 Комментариев:

the display assemblies were purchased via IFixit

из

oh..and i have put the original cracked screen back in and the same problem exists.

из

Добавить комментарий

hmmm....make sure your lcd is connected properly...connection number 2....try a hard reboot by holding the top and bottom button together for like 10 secs

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

i have already done that with two new screens? any other options?

из

Добавить комментарий

had the same problem. tried everything but checked the settings and saw that the settings were turned down. turn it all the way up and see what you find.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Water Damage to the logic board will cause the back light on the LCD to function improperly. Or you might have two broken LCD need to try an LCD you know is working. Good Luck

"That's a bummer man! It's uh...it's a bummer." -The Dude

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

rdt будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 3,217