Перейти к основному содержанию

Дата выхода 25 сентября 2015 г. Модель A1688 / A1633. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 64 или 128 ГБ памяти; в цветах: Серебристый, Золотой, «Серый космос» и «Розовое золото».

2683вопросов Показать все

iPhone 6S home button and touch ID not working after screen replacemen

Hi, I've been repairing phones for a while. I repaired an iPhone 6S screen and attached the original home button to the new screen. However the first time I plugged it all in the home button worked but not the touch ID. I then unplugged everything to get the touch ID working, re- plugged the home button cables and now neither the home button nor the touch ID is working. Ive plugged everything in multiple times since. No difference. Any ideas? Also- the home button does seem to press down quite far however the screws are in as tight as they will possibly go and I'm not sure that that would affect anything? Any ideas? Thanks! :)

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 5
Добавить комментарий

2 Ответов

Наиболее полезный ответ

I would try a new screen for starters. sometimes the ribbon cable behind the plate is bad in the aftermarket screens

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

I would recommend trying a different screen on the device, it might be a bad home button cable on the screen.

If it doesn't work on a different screen then check the button flex for any damage, if it is damaged then you will need to replace the button but you will lose Touch ID permanently

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Добавьте свой ответ

Cara будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 966