No cold water going into machine

Have a top loader washing machine

Brand ; Simpson Eziset 6kg Simple Wash.

The hot water works only while washing No cold water does

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 0


The machine was working fine .

Until ,having to move house.

May have knocked something out of whack.

I have not solved the problem.Although I have managed to cool the water down .By swoping the two electrical valve connections From the hot water to the cold water nozzel.


Thanks jayeff

Would say it is the inlet valve .I'll add it to the list


Добавить комментарий

Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

Посмотрите наш магазин

3 Ответов

Выбранное решение


Check that the cold water tap for the washer is turned on and also that water is available from the tap.

Check that the filter in the end of the cold water inlet hose connection into the washing machine is not blocked.

If all of the above are OK then perhaps the machine's cold water inlet valve is either faulty or not being operated by the control board.

If you have a DMM (Digital MultiMeter) you can use its' Ohmmeter function to test that the valve's operating coil is OK. Do this with the power removed from the washer.

Here is a link to a video that in principle shows what to do. (This is not your valve being shown tested).

Hopefully this is of some help.

Был ли этот ответ полезен?

по рейтингу 5
Добавить комментарий

Check water filter on hose is not blocked. Check cold water tap is working. If they are okay, maybe the inlet solenoid.

Был ли этот ответ полезен?

по рейтингу 0


Hi @glot ,

How is this any different from the answer above?



Your answer was so good he just couldn't control himself. Maybe short term memory loss.


Добавить комментарий

A multimeter will check for electrical resistance, however inlet valves do have a mechanical component, that sometimes will simply seize, open, closed or in between.

In your case, its likely it's seized closed. It will need to be replaced. Its pretty simple, and the parts is about AUD$20.

Был ли этот ответ полезен?

по рейтингу 0
Добавить комментарий

Добавьте свой ответ

Oliver будет вечно благодарен.
Просмотр статистики:

За 24 часа: 15

За 7 дней: 134

За 30 дней: 527

За всё время: 10,913