Replacing glass only now display is so faint I can barely see it.

Question

iPhone 5

Шестое поколение iPhone компании Apple, представленное 12 сентября 2012 года. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 32 или 64 ГБ памяти; в Черном или Белом цвете.

2522вопросов Показать все

yumyab @yumyab

Репутация: 11

1

Опубликовано: 9 апр 2017 г.

Опции

Replacing glass only now display is so faint I can barely see it.

I'm having my first try at replacing just the glass on the iPhone 5 display.

I have a fair few smashed screens lying around and I've bought a few bits and bobs I will need ready to give it a try.

The first screen I ruined as I gave it too much heat and fried it. The second seemed to be going ok till I tested it just now.

I am at the stage where I have removed the frame and the glass leaving me with the digitiser and the backlight. When I plug it into the phone, it turns on, backlight is working but I can see anything unless I hold it at a certain angle then I can just about make out whats supposed to be on the display.

Does anybody know where I went wrong? I have a feeling I peeled off a layer of something I shouldn't have along with the glue.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

2 Ответов

Выбранное решение

Justin Berman @jberman

Репутация: 935

Experimac Corp

5

2

1

Опубликовано: 12 апр 2017 г.

Опции

It sounds to me like you tore the polarizer when you were separating the glass and LCD. Are you doing this to get better at the process, or just to save money on a repair?

Был ли этот ответ полезен?

Да Нет

Оценка 2

1 Комментарий:

I'm trying to teach myself how to do it. Might as well with all these broken screens laying around.

So the polarizer is the layer between the glass and the digitizer? I think I did take off an extra layer there. Is there a way to know which one it is?

I watched a lot of videos and read a lot on the glass only refurbishment and I remember some people mentioning there was a layer you could peel off without doing any damage to save getting the glue off.

13 апр 2017 г. из yumyab

Добавить комментарий

I'm trying to teach myself how to do it. Might as well with all these broken screens laying around.

So the polarizer is the layer between the glass and the digitizer? I think I did take off an extra layer there. Is there a way to know which one it is?

I watched a lot of videos and read a lot on the glass only refurbishment and I remember some people mentioning there was a layer you could peel off without doing any damage to save getting the glue off. — yumyab