Black screen after battery replacement

Question

iPhone 6

Дата выхода 19 сентября 2014 года. Это маленькая версия iPhone 6 Plus с 4.7-дюймовым экраном.

4994вопросов Показать все

GiGaN00B @gigan00b

Репутация: 1

Опубликовано: 24 мая 2017 г.

Опции

Black screen after battery replacement

Hello all,

I replaced the battery of my iPhone 6. So far so good, the iPhone 6 was working for like 5/6 min. After that time, the screen went black. I tested the screen on another iPhone 6 and it works just fine. Again I bought a new battery and tested it, it didn't work.

When I plug the iPhone in my computer, iTunes pops up. It says that iTunes cannot enter the iPhone cause of the security code.

Do you perhaps know how I can solve this issue?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

2 Ответов

Eric @smashederic Репутация: 1,4к smashedit.co.nz 9 1 1 · Answer 1 · 2017-05-24T14:08:54-07:00

Наиболее полезный ответ

Eric @smashederic

Репутация: 1,4к

smashedit.co.nz

9

1

Опубликовано: 24 мая 2017 г.

Опции

Did you make sure to disconnect and drain the board when removing the original battery?

To me this sounds like a backlight chip on the board has blown. Common when not draining the board.

Get a flashlight and shine it on the screen when you believe its on. If there is an image, then my assumptions are correct. You will need to find someone who can do micro-soldering work

hope this helps

Был ли этот ответ полезен?

Да Нет

Оценка 1

1 Комментарий:

The original battery was already drained. It was so messed up that it didn't want to charge.

I think that some chip is blown but not sure which one. Perhaps the backlight chip is broken, not sure. I tried to shine bright flashlight on the screen and I could not see anything. The screen was still black.

I do not have the equipment to test it. It find someone who can do the micro-soldering work. Thx tho.

24 мая 2017 г. из GiGaN00B

Добавить комментарий