iPhone Water Damage Repair Help

Question

iPhone 6s Plus

Дата выхода 25 сентября 2015 г. Модель A1687 / A1634. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 64 или 128 ГБ памяти; в цветах: Серебристый, Золотой, «Серый космос» и «Розовое золото».

1041вопросов Показать все

Diego A @smarticles

Репутация: 197

4

Опубликовано: 27 авг 2017 г.

Опции

iPhone Water Damage Repair Help

The iPhone 6s Plus I have has water damage and won't turn on at all.

When charging it, the motherboard does not get hot at all almost like it's not receiving a charge.

It does not respond to iTunes or is recognized at all.

I took all shields off and used 99.9% IPA already.

I have realigned the power management chip of the bottom right side of the back of the board. (It was crooked).

However, a small little chip or capacitor has fallen off in the process (see pictures). How can I reattach this chip? Also which other chips could be responsible for the death of my iPhone with no heat at all?

Thank you for helping out!

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

2 Ответов

Выбранное решение

iMedic @theimedic

Репутация: 57,5к

iMedic Phone Repairs

18

77

212

Опубликовано: 27 авг 2017 г.

Опции

Well shooting for the Tristar is usually a good go to. Have you tested vcc_main?

Был ли этот ответ полезен?

Да Нет

Оценка 3

3 Комментариев:

I am fairly new to microsoldering so I'm not sure what vcc_main is. Could you clarify?

Also, the small little chip in the first picture is not important?

27 авг 2017 г. из Diego A

Nevermind, I have found vcc_main and the tristar chip. Will check them out. Thanks.

My only question that remains is what is the purpose of the small chip I knocked off in the first picture?

27 авг 2017 г. из Diego A

Blurry picture but it looks like a coil not a chip. Re tin the pads and replace it

27 авг 2017 г. из iMedic

Добавить комментарий

I am fairly new to microsoldering so I'm not sure what vcc_main is. Could you clarify?

Also, the small little chip in the first picture is not important? — Diego A
Nevermind, I have found vcc_main and the tristar chip. Will check them out. Thanks.

My only question that remains is what is the purpose of the small chip I knocked off in the first picture? — Diego A
Blurry picture but it looks like a coil not a chip. Re tin the pads and replace it — iMedic