Дата выхода 19 сентября 2014 года. Это маленькая версия iPhone 6 Plus с 4.7-дюймовым экраном.

4419 Questions Показать все

iPhone 6 turns on but has no image after replacing battery.

Today we replaced the battery and home button in my Iphone 6 and it worked for a few hours until later the screen came up with white and green stripes and then faded to black. However the phone is still on as it still rings and charges and there is a very dim light.

There is no image on the screen at all, not even under a flashlight. Just illuminated black.

Anyone got any ideas?

Ive researched it and so far I think it could be an issue with the connectors perhaps?

Thanks

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 0

Комментарии:

Try unplugging all the connectors again (lcd, digitizer, prox sensor and home button) and plug them back in and make sure they are plugged in correctly, also make sure the fpc connectors on the board are not damaged (it will be better with a microscope)

от

Добавить комментарий
Spread Fixmas Cheer
Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
Spread Fixmas Cheer
Получите $12 за покупку от $50 и выше с промокодом FIXMAS12

1 Ответ

Выбранное решение

Try another screen and then try with the home button unplugged, I've had faulty screen cause these type of issues.

If the old screen works, try that one again.

Был ли этот ответ полезен?

по рейтингу 2
Добавить комментарий

Добавьте свой ответ

Lou Voller будет вечно благодарен.
Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 57