Почините Свои Вещи Сообщество Магазин

Model M5343 / 333 or 400 MHz G3 processor

10вопросов Показать все

Опции

Inverter Boards and their different blinking habits

Howdy all! I know quite a bit about Lombard PowerBooks and Pismo PowerBooks, but I don't know the answer to this question.

I'm pretty sure that the inverter boards for each model is compatible with one another, but I know that the Lombard sleep like blinks a green light, and the Pismo's green light fades on and off.

If I put a Pismo inverter board, then the Lombard would have a fading light, wouldn't it? Likewise, if I put a Lombard inverter into a Pismo, the light would blink instead of fade, correct? Thanks so much!

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет
Оценка 1
Добавить комментарий

1 ответ

Фильтр:
Самые полезные Самые новые Самые старые
Наиболее полезный ответ

Опции

as far as I know, the sleep LED on the powerbooks has nothing to do with the inverter circuit (which instead drives the fluorescent backlight for the LCD display). so swapping the inverter module between models of PB should have no effect on the pulsating or blinking sleep LED

I believe the pulsating or blinking sleep LED is instead controlled by the Power Management Unit (PMU) chip on the logic board.

Был ли этот ответ полезен?

Да Нет
Оценка 1

2 Комментариев:

I could be wrong but IIRC the inverter boards are logic board specific. Ralph

из

Ahhh, so you're saying that though the light is actually on the inverter board, the style of blinking is NOT controlled by the board itself? Thanks so much!

из

Добавить комментарий

Добавьте свой ответ

TommyJames337 будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 3

За всё время: 1,514