Перейти к основному содержанию

Early 2011 Model: A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor

782вопросов Показать все

820-2879 LCD connector shorted now won't power up

Hi, I have an 820-2879 where the LCD connector locking arm shorted out the connector.

I have a green light on charger but no power up. I am trying to learn board repairs so thought a good one to start on.

PP3v42_G3H is at 3.48v but

I'm finding PPBus_G3h on the output of F7040 to be going from 12.8 - 2.8 pause then starts again at 12-8volts and goes down.

I am trying to learn so presume U7000 is what helps produces PPBus_g3h is that correct?

Q7030 has the same irregular voltage on pin 4.

Am I looking down the right line, can I have some help/advice please on where to go next?

Could it also maybe be something trying to turn on then can't hence why it goes back through the voltage cycle.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0

2 Комментариев:

@mccltd this is of course after you changed the connector? Best person to let you know would be either @reecee or @tcrs_circuit

из

Resistance between pins 17/18 and 27/28 of U7000?

из

Добавить комментарий

1 ответ

You could have shorted something out.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

dave будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 81