iPhone 6s plus detect charge bolt but not charge

Question

iPhone 6s Plus

Дата выхода 25 сентября 2015 г. Модель A1687 / A1634. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 64 или 128 ГБ памяти; в цветах: Серебристый, Золотой, «Серый космос» и «Розовое золото».

1041вопросов Показать все

man_fry @manfrysurf

Репутация: 93

3

12

Опубликовано: 23 дек 2017 г.

Опции

iPhone 6s plus detect charge bolt but not charge

hello everyone and happy Christmas !!

I have an iphone 6s plus that detects the charge and appears lightning symbol but does not actually charge and does not absorb ....

The voltage on the battery connector fluctuates between 2.5 volts and 1 volts.

tested the flat dock connector.

I changed tristar and mosfet (u2) without solving the problem.

I have not changed trigris because I have 5 volts ...

could he be the cause or some resistance ???

pretty early

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

Выбранное решение

Minho @refectio

Репутация: 221,4к

Refectio - Mail-in Micro-Soldering Repairs & Data Recovery

15

289

806

Опубликовано: 23 дек 2017 г.

Опции

Which MOSFET did you replace; Q2300 or Q4500?

Your phone is suffering from "fake charging" and has all of the hallmark symptoms of a defective Tristar IC. Seeing as how you already replaced it, I would probe around the circuit to insure everything is securely in place and consider replacing Tristar again.

Был ли этот ответ полезен?

Да Нет

Оценка 2

3 Комментариев:

hi minho I replaced both q2300 and q4500.

I have an update ...

connecting the phone to the bench power supply I have 1.8 volts and 3 volts on capacitors around the tristar, while if I connect the phone by cable and battery the 1.8 volts and 3 volts do not reach those tristar capacitors @refectio

23 дек 2017 г. из man_fry

What happens if you only have the battery connected?

Check the voltage output of your battery and if it looks ok, then double check Tigris & Q2300.

23 дек 2017 г. из Minho

with the inserted battery or lightning cable I have no 1.8 volts and 3 volts on tristar capacitors ... with bench power supply instead of .ok later I try

24 дек 2017 г. из man_fry

Добавить комментарий

hi minho I replaced both q2300 and q4500.

I have an update ...

connecting the phone to the bench power supply I have 1.8 volts and 3 volts on capacitors around the tristar, while if I connect the phone by cable and battery the 1.8 volts and 3 volts do not reach those tristar capacitors @refectio — man_fry
What happens if you only have the battery connected?

Check the voltage output of your battery and if it looks ok, then double check Tigris & Q2300. — Minho
with the inserted battery or lightning cable I have no 1.8 volts and 3 volts on tristar capacitors ... with bench power supply instead of .ok later I try — man_fry

iPhone 6s Plus

iPhone 6s plus detect charge bolt but not charge

1 ответ

Добавьте свой ответ