Replaced power button sensor
I replaced m power button sensor and it clicks now but now my iPhone won't turn on. I tried to do a hard reset still not turning on
Это хороший вопрос?
Оценка
0
454205
1 ответ
Выбранное решение
Репутация: 121
3
Did you try turning it on with a power cable?
Other then that, try reconnecting the flex cable to the motherboard.
Был ли этот ответ полезен?
Оценка
0
5 Комментариев
Yes i've tried with the power cable.
из Sandy
Try turning the iPhone on while the power button flex isn't connected to the motherboard. If it turns on, here's your problem.
из Andrea Hrelja
I fixed it. The problem was a little black rubber thingy that goes to the logic board was not where it should of been so put it in it's proper place put it together and booted right up.
из Sandy
That's weird, the rubber thing even if it's there or not it should not cause an issue.
из Ben
Yeah, I know I took it apart 3 times and ignored the black rubber but when I put it in the right place it booted right up.
из Sandy