РАЗРЕШЕННЫЙ: Hose is getting sucked in and crimped at suction base - Dyson Cinetic Big Ball Animal Upright

Hose is getting sucked in and crimped at suction base

I have a ball animal 2 vacuum. The hose is getting sucked in and crimped at the base. I checked for blockages and did not find any. It's also not sucking up as much as it should. Any suggestions? Thanks in advance.

Опубликовано: 22 янв 2018 г.

Опции

Hi @kristieleigh19 ,

Have you checked that the filter is not clogged up?

Был ли этот ответ полезен?

Да Нет

Оценка 1

5 Комментариев:

I will remove and wash them and see if that works. Thanks!

22 янв 2018 г. из Kristie Dilxger

Have you pulled the hose off and make sure you can see light all the way through? Typically if your hose is collapsing, there is a blockage issue somewhere.

22 янв 2018 г. из Tony Stockton

Yes and nothing is there.

22 янв 2018 г. из Kristie Dilxger

Does the sound of the motor and suction change when you disconnect the hose from down by the ball?

23 янв 2018 г. из Tony Stockton

Yes, sound changes. Plz help

29 мар 2020 г. из Alberto

Добавить комментарий

Dyson Cinetic Big Ball Animal Upright

Hose is getting sucked in and crimped at suction base

1 ответ

Добавьте свой ответ