System doesn't recognize Samsung EVO SSD

I want to install a new drive in my MacBook Pro. I chose the Samsung EVO 250 GB.

To install I followed these steps:

  • Connecting the SSD with a SATA cable to my Mac. Using disk utility, erase the SSD. Clicked on GUID partition and MacOS extended (journaled).
  • With carbon copy cloner I cloned my old hard drive to the SSD, including the reboot option. I then installed the new SSD in my system,

But when I turn it on it only shows the white screen of death. When I start up with cmd+r and go to disk utility, the SSD does not show up.

What did i do wrong? I hope someone can help me out!

Thanks in advance.

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 0

Комментарии:

I would recommend you stick with Sierra. High Sierra has some issues still with SATA based SSD's with the newer APFS High Sierra automatically upgrades the drive to.

от

Добавить комментарий
Spread Fixmas Cheer
Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
Spread Fixmas Cheer
Получите $12 за покупку от $50 и выше с промокодом FIXMAS12

3 Ответов

Выбранное решение

reformat the drive & install the system. The do not clone (destroys the repair partition). Use migration Assistant to move your user and apps.

Был ли этот ответ полезен?

по рейтингу 2

Комментарии:

@mayer - Likely needs a new HD SATA cable too!

от

@danj absolutely , and the 2012 model cable.

от

Here's the details, follow this IFIXIT guide: MacBook Pro 13" Unibody Late 2011 Hard Drive Cable Replacement and this is the better cable: MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable. I also recommend placing some electrical tape on the uppercase where the cable rests as the aluminum abrades the cable

от

Добавить комментарий

@piera , I can almost guarantee that you either have a damaged SATA cable, or a defective Samsung SSD Drive.

I am running this config with High Sierra fine.

Block Image

Block Image

Also, there is no reason to use CCC to clone.

The built in migration wizard on a clean install will take care of anything.

The only thing you may need to do is re-enter installation keys for applications like MS Office.

Был ли этот ответ полезен?

по рейтингу 1

Комментарии:

I would still stick with the older Sierra OS @avanteguarde I'm still running the beta releases and they are still having issues with queueing with the Finder process. Don't get wrong I do think the new file system is better! But not at the risk of not being able to save a file without needing to wait a good 30 sec. or more depending on what else I have running concurrently. Mac OS Extended (Journaled) doesn't have this issue.

от

@danj I am in no way disputing the OS. Just saying the drive works great! :-)

от

@avanteguarde - And I'm using a Samsung 850 EVO in my system too! ;-} Great Drive!

от

Добавить комментарий

I am also running the 500gb Samsung Evo SSD - after installing I had an identical issue. It was indeed the SATA cable. -- Went ahead and installed the new SATA cable, and the system works very well - and significantly better than it did with the old crappy HDD.

Also, I am running High Sierra and everything is fully operational.

Best of luck in fixing your issue brother!

Был ли этот ответ полезен?

по рейтингу 0
Добавить комментарий

Добавьте свой ответ

Piera будет вечно благодарен.
Просмотр статистики:

За 24 часа: 8

За 7 дней: 57

За 30 дней: 272

За всё время: 2,400