Перейти к основному содержанию

Дата выхода 25 сентября 2015 г. Модель A1688 / A1633. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 64 или 128 ГБ памяти; в цветах: Серебристый, Золотой, «Серый космос» и «Розовое золото».

2683вопросов Показать все

Home button moves a little in the frame of the new screen

I replaced the screen in my iPhone 6s recently and I noticed that the home button moves a tiny bit and I want to know if I should something about it or is it fine to leave alone. Also if I need to fix something what should I do to make it fit better?

It’s been working perfectly for the last couple weeks but I want to make sure I don’t cause any permenant damage.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Выбранное решение

A quick fix is to bend the metal plate behind the home button closer to the home button.

Был ли этот ответ полезен?

Оценка 3

5 Комментариев:

If I don’t do this, am I at risk of any permanent damage to the button?

из

Well the more loose a button is, the higher chance the cable can get ripped if the home button was to be rotated from pushing it down and rotating it.

из

Ok thanks, do you think applying new adhesive the gasket might help? I’ll try bending the plate as soon as I can

из

The gasket only keeps dust from getting in there. Just bending the bracket should be fine

из

Applying the home button rubber gasket adhesive will help, stops the home button from rotating and gives it a more satisfying click in result.

Bending the bracket is good by itself as well, just doesn't make it perfect without the gasket.

из

Добавить комментарий

Добавьте свой ответ

Nicholas Sultana будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 587