How can I fix a DS Lite that does not maintain its top case position?

Question

Nintendo DS Lite

This Nintendo DS Lite was released in 2006 as the successor to the Nintendo DS. Getting inside this device is simple, making for easy fixes.

316вопросов Показать все

Dade Aka @dadeaka

Репутация: 1

Опубликовано: 26 фев 2018 г.

Опции

How can I fix a DS Lite that does not maintain its top case position?

I would like to repair my old DS Lite that felt on the ground many years ago. It still works but now it has a hole which reveals its hinge. The problem is that when I open the DS Lite to play its top case won't stay in position, infact I can't hear any "crack" that usually it does when the top part locks to stay in that specific position.

Which parts have I to buy to fix it?

Here are some images:

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

2 Ответов

Выбранное решение

jayeff @jayeff

Репутация: 448,9к

11

366

1,4к

Опубликовано: 26 фев 2018 г.

Опции

Hi @dadeaka ,

It looks like the upper case will have to be replaced.

Here is a link to the ifixit Nintendo DS Lite Upper Case Replacement guide, which should be of some help.

Here is a link to a supplier of parts for the device. (scroll to the bottom to find upper case parts). It is not a recommendation to use them. It is shown to give an idea of the cost of the part.

Был ли этот ответ полезен?

Да Нет

Оценка 1

3 Комментариев:

Good luck finding a screwdriver that small! Lol

27 фев 2018 г. из Technical Difficulties

Hi,

I might have the last laugh

Tools required:

Phillips #00 Screwdriver

Tri-point Y1 Screwdriver

27 фев 2018 г. из jayeff

Can I just ask, when the OP says the top case doesn't stay in position, do you mean it is really floppy? My DS has no resistance at all to keep the screen in place. I just wondered if replacing the upper case will resolve this issue too? Thanks

27 янв 2019 г. из Gary Ogilvie

Добавить комментарий

Hi,

I might have the last laugh

Tools required:

Phillips #00 Screwdriver

Tri-point Y1 Screwdriver — jayeff
Can I just ask, when the OP says the top case doesn't stay in position, do you mean it is really floppy? My DS has no resistance at all to keep the screen in place. I just wondered if replacing the upper case will resolve this issue too? Thanks — Gary Ogilvie