Репутация: 47
3
I have replaced few iPhone 6 screen and I've noticed, those pentalobe screws don't attach tight everytime and sometimes they just keep spinning and don't get tight. What do I do wrong with them? I do get them off, but with tricks and not normal way.
Это хороший вопрос?
Репутация: 685,2к
3,4к
1,1к
2,6к
Try this liberation kit: [связанный продукт отсутствует или отключен: IF118-034]
Был ли этот ответ полезен?
I have bigger iFixit kit. Does this offers something special to pentalobe problem?
@saltwater well YES! It replaces all the Pentalobe screws with Phillips screws.
Репутация: 983
9
5
1
Well what I experienced a lot of times is the following:
So sometimes when I screw them in the, display is not completely down so the screws don't get in the hole.
My advise is to apply light pressure on the screen under the home button and than try to screw them in.
Maybe this works, I hope so. If not let me know.
Был ли этот ответ полезен?
Репутация: 221,4к
15
289
806
They're very delicate screws and if you or anyone else overtightened them they will strip easily. You cold try putting a bit of extra Loctite (thread locker) on the threads. It's important to develop a delicate touch when dealing with all of these tiny screws.
Был ли этот ответ полезен?
Ok, I see. Does this mean that in such event screw itself breaks a bit and needs to be changed or does overtightening break the hole/thread itself?
Could be both, you will need to look closely at the screws to see if they are damaged and see if new ones grip well in the "holes".
За последние 24часов: 0
За последние 7 дней: 0
За последние 30 дней: 0
За всё время: 132
