Toggling Silent/mute switch doesn't work. Then mutes/unmutes by itself

Question

iPhone 6s

Дата выхода 25 сентября 2015 г. Модель A1688 / A1633. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 64 или 128 ГБ памяти; в цветах: Серебристый, Золотой, «Серый космос» и «Розовое золото».

2693вопросов Показать все

Adam Comis @amcdc

Репутация: 1

Опубликовано: 12 апр 2018 г.

Опции

Toggling Silent/mute switch doesn't work. Then mutes/unmutes by itself

My iphone 6s mute/silent switch doesnt respond correctly when I toggle it. Switch seems to be working fine mechanically (been cleaned as much as possible from the outside).

Further, the mute/silent function changes on its own. Sometimes ever couple seconds (even though switch not moving).

Seems the audio/power cable (and bracket) need to be replaced. Does the button also need to be replaced? Anyway I can open it up and the solution will be simpler?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

Выбранное решение

Minho @refectio

Репутация: 221,5к

15

290

807

Опубликовано: 12 апр 2018 г.

Опции

It definitely sounds like the button on the flex is damaged. You can change this yourself.

This is not the simplest DIY repair so if you're all thumbs, I wouldn't recommend it as a lot can go wrong here. If you're a good fixer in general and have a delicate touch, you should certainly try it. The repair guide is here.

Был ли этот ответ полезен?

Да Нет

Оценка 5

5 Комментариев:

YES! I saw that. Thank you. So I dont have to replace the mechanical switch? Just the cable and bracket?

12 апр 2018 г. из Adam Comis

The physical actuator is on the flex. The button you push only pushes itself against the actuator.

12 апр 2018 г. из Minho

I understand. Is it possible there is just a poor connection/dirt between the actuator and the button? Or does the flex definitely need replacing?

12 апр 2018 г. из Adam Comis

It's possible, sometimes it can get out of alignment. You'll have to open it up and take a closer look.

12 апр 2018 г. из Minho

When I order the volume button cables I usually make sure it comes with the metal bracket and the vibrate switch attached with the metal bracket too.

What generally happens is that the plastic 4 holes gets loose from the metal bracket for the switch making it hard to switch or getting stuck in a certain position.

A worn out switch or teared ribbon cable may cause the vibrate switch to go on and off randomly.

13 апр 2018 г. из Ben

Добавить комментарий

YES! I saw that. Thank you. So I dont have to replace the mechanical switch? Just the cable and bracket? — Adam Comis
The physical actuator is on the flex. The button you push only pushes itself against the actuator. — Minho
I understand. Is it possible there is just a poor connection/dirt between the actuator and the button? Or does the flex definitely need replacing? — Adam Comis
It's possible, sometimes it can get out of alignment. You'll have to open it up and take a closer look. — Minho
When I order the volume button cables I usually make sure it comes with the metal bracket and the vibrate switch attached with the metal bracket too.

What generally happens is that the plastic 4 holes gets loose from the metal bracket for the switch making it hard to switch or getting stuck in a certain position.

A worn out switch or teared ribbon cable may cause the vibrate switch to go on and off randomly. — Ben

iPhone 6s

Toggling Silent/mute switch doesn't work. Then mutes/unmutes by itself

1 ответ

Добавьте свой ответ