Перейти к основному содержанию

Выпущенный 16 сентября 2016 года смартфон нарекли iPhone 7 Plus. Вышло несколько моделей нового устройства: A1661, A1784, и A1785, а также можно было выбрать между версиями на 32, 128 и 256 Гб встроенного накопителя. На выбор можно было приобрести золотой, розовое золото, серебристый, Jet Black и (PRODUCT) Red оттенки корпусов.

1361вопросов Показать все

Having problems with screen replacement

Having trouble re installing the front facing camera assembly, I was told to buy the plastic holders for the camera and sensor, I am not sure where to put the sensor holder and I can’t seem to make it all fit without the actual assembly partially blocking off the slot where to earpiece clips in. Any ideas?

Block Image

Block Image

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

2 Ответов

Выбранное решение

Your front camera plastic holder is not in the correct orientation.

Rotate it 90°C clockwize and it will fit the front camera no problem. If you want you can check matching of the notches / indents of the front camera itself to the plastic gasket.

Use this image for reference:

https://d3nevzfk7ii3be.cloudfront.net/ig...

The two indents should be top and bottom and not left and right to fit the camera.

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий
Наиболее полезный ответ

try and follow the guide to see whats going wrong for you.

iPhone 7 Front Camera and Sensor Cable Replacement

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Добавьте свой ответ

Ben Rowson будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 49