Перейти к основному содержанию

1.86GHz or 2.13GHz Processor, 128GB or 256GB Flash Storage

147вопросов Показать все

Any way to read part of screen that’s broken during Apple HardwareTest

So I’m working on this reclamation project for this 13” 2010 MacBook Air. About 1/4th of the screen is broken, so normally I have it hooked up to an external monitor, which works fine.

Problem started when I replaced the keyboard recently after it’s power key stopped working. I did the replacement fine, the keyboard now works, but the computer is ghastly laggish when it’s doing anything.

I burned Apple hardware test onto a bootable USB, and ran the diagnostic, but the error code that it spits out is half-blocked from the screen damage. Bc it’s in AHT, the external monitor doesn’t work, and I can’t move the window to where I can see the whole code. All I can make out is “4SNS/1/40...” and that’s all I can see.

Is there anyway to figure out what the rest of that code is? I can’t seem to select text so copy and paste doesn’t seem to be an option either.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

2 Ответов

Наиболее полезный ответ

Print the screen or capture the screen and then print it.

Был ли этот ответ полезен?

Оценка 2
Добавить комментарий

I may be wrong @mayer correct me on this , but if you start the macbook up in clam shell mode you can see the diagnostics on the external display.

https://support.apple.com/en-gb/ht201834

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Добавьте свой ответ

vinet09 будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 37