Black screen is seen with flashlight and works with external display

Question

MacBook Pro 15" Retina Display Mid 2015

2.2 GHz (Turbo Boost up to 3.4 GHz), 2.5 GHz (Turbo Boost up to 3.7 GHz), or 2.8 GHz (Turbo Boost up to 4.0 GHz) quad-core Intel Core i7 processor with 6 MB shared L3 cache.

773вопросов Показать все

Facundo Panizza @facundopanizza

Репутация: 25

2

Опубликовано: 15 июн 2018 г.

Опции

Black screen is seen with flashlight and works with external display

Hello good morning, I just turned on my Macbook pro 15" 2015 model: A1398.

I was reneging for a while until I could see with a flashlight the log in screen, logged in and put in an hdmi cable, and everything is working except the screen that is still the same, in fact I'm sending this message from the macbook.

You know what it might be?

New Photos:

This is the code you asked me for: 820-5482-A

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

4 Ответов

Выбранное решение

oldturkey03 @oldturkey03

Репутация: 781,6к

1,1к

893

2,3к

Опубликовано: 15 июн 2018 г.

Опции

'''++Facundo Panizza++''' you do want to go ahead and check the parts on your board. You need to get to the logicboard so follow this guide to get there.Use this guide MacBook Pro 15" Retina Display Mid 2015 Logic Board Replacement for that. Check the board and see if it has an 820-XXXX number on it. this is important since there are a few variations. Take some good pictures of your board etc. and post those with your question. That will allow us to see what you see. Use this guide Adding images to an existing question for that. Check the display cable to ensure that it is properly seated and that the connector is not showing any damage on the pins. Then you want to start by checking the backlight fuse for continuity and check if you have power going to it. This will be tricky since you are going to power the computer on. Do not shorten other components out while testing it. Let us know what you find.

If unsure of doing any of this contact the experts @reecee and @tcrs_circuit to see what their take is on this and if they can help you further.

Инструкция

Adding images to an existing question

Сложность:

Очень просто

—

2 - 5 minutes

MacBook Pro 15" Retina Display Mid 2015 Logic Board Изображение

Инструкция

MacBook Pro 15" Retina Display Mid 2015 Logic Board Replacement

Сложность:

Сложно

—

1 - 3 hours

Был ли этот ответ полезен?

Да Нет

Оценка 3

6 Комментариев:

I'm sorry for the long delay, I leave the data you had asked me hopefully serve something, not get to see any corrosion, just a few stains near the load pin

16 ноя 2018 г. из Facundo Panizza

I think the 9700 fuse is not walking, because I used the multimeter and gives me 0, to use it with other fuses, gives me varied numbers

16 ноя 2018 г. из Facundo Panizza

Facundo Panizza do not worry about any numbers. Just check it for continuity https://www.swe-check.com.au/pages/learn...

16 ноя 2018 г. из oldturkey03

Well, it didn't give 1, say 0.00.

16 ноя 2018 г. из Facundo Panizza

okay sounds like a bad fuse. Replace it and check the circuit since something caused the fuse to blow. Check your connector make sure there is no corrosion or damage on it.

17 ноя 2018 г. из oldturkey03

Показать 1 больше комментариев

Добавить комментарий

I'm sorry for the long delay, I leave the data you had asked me hopefully serve something, not get to see any corrosion, just a few stains near the load pin — Facundo Panizza
I think the 9700 fuse is not walking, because I used the multimeter and gives me 0, to use it with other fuses, gives me varied numbers — Facundo Panizza
Facundo Panizza do not worry about any numbers. Just check it for continuity https://www.swe-check.com.au/pages/learn... — oldturkey03
okay sounds like a bad fuse. Replace it and check the circuit since something caused the fuse to blow. Check your connector make sure there is no corrosion or damage on it. — oldturkey03

score 1 · Answer 1 · 2018-06-15T10:51:43-07:00

Dan @danj

Репутация: 478,9к

Self employed contract worker

35

329

970

Опубликовано: 15 июн 2018 г.

Опции

You’ll need to check the backlight fuse and you might need a new backlight LED driver chip as these tend to fail.

Был ли этот ответ полезен?

Да Нет

Оценка 1

Добавить комментарий

Drew Canada @takkaz Репутация: 1,3к 15 4 1 · Answer 2 · 2018-06-15T10:00:34-07:00

Drew Canada @takkaz

Репутация: 1,3к

15

4

1

Опубликовано: 15 июн 2018 г.

Опции

Hi Facundo,

To me it sounds like your backlight went out on your Macbook. I would look into a possible replacement, but before you order another one. I would check into seeing if it just came unplugged or the cable for it went bad. That way you do not waste your money on another screen if that was not the problem.

Best Regards,

Drew.

Был ли этот ответ полезен?

Да Нет

Оценка -1

1 Комментарий:

@takkaz what kind of backlight would you purchase for this and which cable may have gone bad?

15 июн 2018 г. из oldturkey03

Добавить комментарий