Best tips to use for micro soldering on the Hakko FX888D?

Question

iPhone X

Apple выпустила смартфон 4 ноября 2017 года в двух различных конфигурациях: A1865, A1901 и дала название iPhone X. Доступны варианты с разными стандартами мобильной связи: GSM или CDMA; с двумя объемами хранилища: 64 или 256 Гб; двумя различными оттенками корпуса: серебристый и Space Gray.

1199вопросов Показать все

Tired @tired

Репутация: 1

Опубликовано: 31 июл 2018 г.

Опции

Best tips to use for micro soldering on the Hakko FX888D?

Hi, Everyone,

I am a brand spanking new newbie when it comes to electronics repair but i'm very excited to learn board repair. I purchased the Hakko FX888D to practice soldering on dummy boards and will probably continue to use it for some time.

My question: What are the best tips to use with this station for micro soldering? A part number would be great or a link on ebay even better!

Also what do you guys think about this hot air station for a beginner?: https://www.ebay.ca/itm/152922627479

Thank you so much!

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

3 Ответов

Выбранное решение

arbaman @arbaman

Репутация: 102,6к

10

54

291

Опубликовано: 8 апр 2019 г.

Опции

Don't know at which Hakko you looked at, PatsyF, but it's not a cheap manufacturer. On the contrary it's a very reputable one, among other brands that were on the market well before "microsoldering craze", like Weller, Ersa, Pace, JBC, Metcal, just to mention a few. Be very careful where you buy, as it's well known there are clones around. Also consider there's quite a difference between a simple soldering iron and a soldering station..performance and prices can't really be compared.

Был ли этот ответ полезен?

Да Нет

Оценка 1

2 Комментариев:

Hi thanks for the reply.

The hakko soldering station mentioned is £120 on eBay. Seems cheaper than most of the others I was thinking about getting. That's why I was wondering if it is up to the task for mobile phone repairs / microsoldering.

The tip came in at an extra £12.

Is there anything you would recommend that won't bust the bank arbaman?

Thanks again.

9 апр 2019 г. из PatsyF

I would recommend a reputable seller for such a purchase, on that platform after 60 days if any problem arises you are on your own. On top of that a Hakko for that price would probably be either a clone or unsuitable for microsoldering use. You 'll have to look for a reliable station, that's one of the main tools you'll be using every day. It should be handy, lightweight, tips should be easily replaceable and you'll need a few to start with, I'd say 0.2/0.4/0.7/ 1mm are all more or less indispensable for phone repairs. You will start having suitable stations from reliable manufacturers around 200/300 $, your bank account should survive that. I have an Ersa i-con Nano, great small station, the soldering iron is more like a pencil than an iron, works like a charm. Tips are a bit expensive. But I'm sure any of the other manufacturers will have a good station to start with for a reasonable price..google around, make comparisons, read opinions, avoid cheap chinese crap ;)

9 апр 2019 г. из arbaman

Добавить комментарий

Hi thanks for the reply.

The hakko soldering station mentioned is £120 on eBay. Seems cheaper than most of the others I was thinking about getting. That's why I was wondering if it is up to the task for mobile phone repairs / microsoldering.

The tip came in at an extra £12.

Is there anything you would recommend that won't bust the bank arbaman?

Thanks again. — PatsyF
I would recommend a reputable seller for such a purchase, on that platform after 60 days if any problem arises you are on your own. On top of that a Hakko for that price would probably be either a clone or unsuitable for microsoldering use. You 'll have to look for a reliable station, that's one of the main tools you'll be using every day. It should be handy, lightweight, tips should be easily replaceable and you'll need a few to start with, I'd say 0.2/0.4/0.7/ 1mm are all more or less indispensable for phone repairs. You will start having suitable stations from reliable manufacturers around 200/300 $, your bank account should survive that. I have an Ersa i-con Nano, great small station, the soldering iron is more like a pencil than an iron, works like a charm. Tips are a bit expensive. But I'm sure any of the other manufacturers will have a good station to start with for a reasonable price..google around, make comparisons, read opinions, avoid cheap chinese crap ;) — arbaman

daniel @tech_ni Репутация: 34,6к 10 22 44 · Answer 1 · 2018-08-01T03:44:20-07:00

Наиболее полезный ответ

daniel @tech_ni

Репутация: 34,6к

10

22

44

Опубликовано: 1 авг 2018 г.

Опции

the hot air station is fine as for tip i would say T18-C05

Был ли этот ответ полезен?

Да Нет

Оценка 2

Добавить комментарий

score 0 · Answer 2 · 2018-08-12T09:37:22-07:00

jessabethany @jessabethany

Репутация: 30,6к

iPad Rehab--Microsoldering, Mail-in Repair, Data Recovery

25

71

41

Опубликовано: 12 авг 2018 г.

Опции

I think learning to microsolder on cheap crappy hot air stations is like trying to put out a fire with a hose that is alternating fast and slow water flow——way harder than using a solid affordable station like the Quick861dw that is the clear winner for value hot air rework.

Был ли этот ответ полезен?

Да Нет

Оценка 0

2 Комментариев:

Jessa, thank you for replying to me. Love your videos and you are the reason I am now interested in electronics. I will take your advice and just save for a better set up.

23 сен 2018 г. из Tired

Is the hakko station good enough for microsoldering work on iPhones etc. It looks a bit cheap?

Asking as I'm looking for something myself.

Thanks

8 апр 2019 г. из PatsyF

Добавить комментарий

iPhone X

Best tips to use for micro soldering on the Hakko FX888D?

3 Ответов

Добавьте свой ответ