Перейти к основному содержанию

The Samsung B1445A is a front-loading high efficiency washing machine by Samsung.

15 Questions Показать все

Why my washer machine won't power up ( 9 out of 10x)?

My Samsung washing won’t power up, but if I keep continually playing with the press ON button every 5 minutes: 1 in 15x the screen display would be ON for few seconds. And if i am fast enough before the display disappear, to starting my program, then everything seems fine. The cycle runs fine to the end, no problem. The display looks fine, everything seems fine, no errors. As long as if I am fast enough before the display disappear.

What seems the problems with the power up? And how could i repair that?

Update (10/09/2018)

Is there any other possible explanation beside the wire loose? The washing machine works in every ways except powering up . Once it power up, it starts fine with program cycle to the end, OK, no disruption nor error.

Which part of the control board am i focusing? Isn’t sound more like the on and off button has problem, every time when i press on/off button, every time there is a sound “click” but then it turns itself off, and sometime it displays the screen for a few seconds before turn off by itself.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

по рейтингу 0
Добавить комментарий

1 ответ

Наиболее полезный ответ

Use a multimeter and check the wiring going to the control board. Look for loose wires and also examine the solder joints looking for a cold solder. You can also go over the connections with a soldering iron and flow them.

This really sounds like a bad electrical connection or a bad start button. Here’s a video on taking care of those pesky cold solder joints:

https://www.youtube.com/watch?v=VLubdi6a...

Был ли этот ответ полезен?

по рейтингу 1

Комментарии:

Is there any other possible explanation beside the wire loose? The washing machine works in every ways except powering up . Once it power up, it starts fine with program cycle to the end, OK, no disruption nor error.

Which part of the control board am i focusing? Isn’t sound more like the on and off button has problem, every time when i press on/off button, every time there is a sound “click” but then it turns itself off, and sometime it displays the screen for a few seconds before turn off by itself.

by

Are you saying if i replaced the control board, that would solved the problem!!?

I will started with the loose wires first, Hopefully that fix the problem.

The control board seems hard to reach especially to flit over the circuit board for the solder joints.

by

NO! I'm not saying that, what do I know, I don't have access to the machine to test it. That's your job.

by

Добавить комментарий

Добавьте свой ответ

wwe joh будет вечно благодарен.
Просмотр статистики:

Past 24 Hours: 2

Past 7 Days: 20

Past 30 Days: 88

За всё время: 896